|
|
|
|
|
 |
 |
 |
 |
|
|
|
Norco has two jacks that allow a gauge to be attached
(via a special 1/4" NPT Port, drilled and tapped into the side of the jack during the assembly
process). The jacks are special 12 1/2 and 22 ton models. For the 12 1/2 and 22 ton models you must specify either the 76412BG (12 1/2 ton) or the 76520BG (22 ton).
The Gauge assembly, sold separately, is model Number 78021. PLEASE NOTE - The jacks do NOT come with Gauge installed, they are SEPARATE ITEMS, YOU must install the plumbing nipple, elbow and gauge yourself. Generally it is simply a matter of laying the jack on it's side, unplugging the Allen pipe plug in the jack, installing the nipple and elbow, then screwing in the Gauge, not exactly Nuclear Science, however, the operating pressure of the jacks is 10,000 psi so the fittings MUST be cranked in fairly tight to ensure that there will be no leaks. |
|
| TONS | LOW | STROKE | EXTENDED | MAX /With SCREW | BASE | MODEL | LIST PRICE | OUR PRICE | WT. |
| 12.5 | 9.45" | 5.91" | 15.36" | 18.9" | 5.51" x 5.51" | 76412BG | $254.36 | $165.33 | 18 lbs. |
| 22 | 10.83" | 6.61" | 17.44" | 20.2" | 6.06" x 6.57" | 76520BG | $369.23 | $240.00 | 31 lbs. |
| Item | MODEL # | LIST PRICE | OUR PRICE | WT. |
| GAUGE | 78021 | $414.36 | $269.33 | 2 lbs. |
The NORCO gauge listed is made in either America, Germany or Poland,
a wet-type, 4" diameter face and includes a short 1/4" high pressure Nipple and Elbow for
mounting the Gauge at the side of the jack (approximately indicated by the above graphic image). Accurate within 2 1/2 %.
It has a face plate indicating up to 10,000 PSI and a special dual range reading of
TONS OF FORCE designed for either the 12 ton or 20 ton jacks.
|
|
|
|
|
Consumer Phone Hours: 9:00 AM til 2:00 PM, Pacific Time, Monday - Friday,
.
OTTO SERVICE CO., PO BOX 1805, Sun Valley, California 91353-1805
United States of America
©2023 OTTO SERVICE