It's hard to touch the power output, simplicity of use and versatility of AC electric hydraulic pumps. Choosing an Electric Pumps can be quite confusing, though, mainly because there are so many different options that have to be considered based on the specific operation you are doing:
Simple pressing, punching or bending jobs require only simple ADVANCE and
RETRACT valve functions.
Clamping, lifting and positioning jobs require ADVANCE, HOLD and RETRACT valve functions.
Post-tensioning, pre-stressing and pile testing operations cannot tolerate any pressure loss during valve shifting and require special LOCKING valves.
Further considerations are:
Single Acting or Double Acting Ram/Cylinders require special valving to operate them properly.
The quantity, capacity and length of your Ram/Cylinders may require extra large oil reservoirs.
The number and sizes of your Ram/Cylinders may also demand that heavy duty, higher flow rate pumps be used to save time and expensive man hours.
JACKING SYSTEMS PAGE PUMPS PAGE
This page updated by Richard J. Tafilaw, August 2, 2016. Online since March 30, 1996
Consumer Phone Hours: 9:00 AM til 2:00 PM, Pacific Time, Monday - Friday,
OTTO SERVICE CO., 2014 Burbank Blvd., Burbank, California 91506
United States of America